Evakool Fibreglass Icebox 85 litre

Dimensions 830mm L x 515mm W x 475mm H

weight 12kgs

 Features

CONSTRUCTION
The inner and outer skins are one piece moulded fibreglass with no joins or projections. They are bonded together by rigid insulation foam with a thickness of approximately 40mm.

INSULATION
The insulation used is the BEST available for this purpose and is injected under controlled temperature and pressure, creating perfect lamination and bond of both inner and outer skins. This insulation has been formulated for our exclusive use and tested under extreme Australian conditions.

LID
The lid is 40mm thick, filled with insulation and capable of being used as a seat. The lid will rest in an open position 5 degrees past the vertical without straps. Thus giving a total smooth clean interior surface without any attachments or projections.

HANDLES
Moulded in Nylon these give comfortable carrying without crushing the fingers.

HINGES
Moulded in Nylon our unique system allows the lid to be detached for easy of loading and cleaning. The Hinges will also detach automatically if someone forces the lid back - preventing damage to the box.

LATCHES
Rubber latches maintain constant pressure on the lid producing a perfect seal. Locks can be used where security is an issue.

CORNERS
The feet are moulded in nylon and give protection to the corners and the sides of the ice box.

BUNG
The bung is moulded and does not leak. The bungs are threaded on the outside, giving clean through drainage using a moulded tube on the inside.

SEALING FOAM
The sealing foam (24mm wide) used on the lid is approved for food handling. (USA FDA and Australian Public Health Authorities)

HYGIENE
The inside and outside fibreglass skins are moulded, glass smooth and do not absorb tastes or smells. This makes cleaning efficient and easy. There are no screws, joints or attachments - giving a one peice moulded interior surface.